[ColorForth] colorForth ~popularity

["t" <loveall@xxxxxxxxx>]

----- Original Message -----
From: "Tim Neitz" <tim@xxxxx>
To: <loveall@xxxxxxxxx>
Sent: Tuesday, April 09, 2002 5:19 AM
Subject: Re: [ColorForth] colorForth ~popularity (fwd)


> a reply to the mailing list didn't seem to work
> so I'm forarding it to your personal address.
>
> ---------- Forwarded message ----------
> Date: Tue, 9 Apr 2002 08:27:04 +0200 (CEST)
> From: Tim Neitz
> To: ColorForth List Member <ColorForth@xxxxxxxxxxxxxxxxxx>
> Subject: Re: [ColorForth] colorForth ~popularity
>
> Dear Terry, Tim here.
>
> I know that there are some people that use colorforth.
> flux and Enth are a dual (standard forth and colorforth) in one.
> http://pringle.sphosting.com
>
> Jeff Foxx's AHA is also similar from what I understand.
>
> I'm looking for a native forth with a tcp/ip connectivity. Would you have
> any advice about this?
>
> Hoping to have helped.
>
> With kind regards,
>
> Tim Neitz.
>

There are several implementations of color forth available from Chuck, Jeff,
Sean and myself all linked at
http://www.users.qwest.net/~loveall/c4index.htm

Re tcp/ip, not a lot to say. I did a commercial UDP stack for a RTOS system
about 10 years ago. Very specialized code tuned to the network chip (a National
Lance 7990) on a propriatory 68030 VME bus Forth. Not really very useful.

Some people use Forth on DOS, Windows and Linux for the OS provided networking.
Working with a network socket is about as complicated as working with a file.

Or you could roll your own. A micro TCP/IP stack, written in C, can be found
at:
http://dunkels.com/adam/uip/
Use that as a starting point and tune to your specific NIC and application.

Regards,
Terry
------------------------

To Unsubscribe from this list, send mail to Mdaemon@xxxxxxxxxxxxxxxxxx with:
unsubscribe ColorForth
as the first and only line within the message body
Problems   -   List-Admin@xxxxxxxxxxxxxxxxxx
Main ColorForth site   -   http://www.colorforth.com