[ColorForth] Boot problems.

["Richard Collins" <rscollins@xxxxxxxxxxxxxxx>]

I had a dig around and found the source for color1ms3.com. All the details
are at http://homepages.paradise.net.nz/rscollins/color1ms3/. Hope someone
finds that helpful.

Also, in the name of international confusion I moved color1ms3.com to
http://homepages.paradise.net.nz/rscollins/color1ms3/color1ms3.com.

Enjoy,

Richard Collins

----- Original Message -----
From: "Bob Shafer" <bobsh@xxxxxxxxx>
To: "ColorForth List Member" <ColorForth@xxxxxxxxxxxxxxxxxx>
Sent: Thursday, June 20, 2002 10:44 AM
Subject: [ColorForth] Boot problems.


> I'm very pleased to report that color1ms3.com works on an old HP Vectra PC
> I've got sitting here, which no other colorForth has worked on yet. Very,
> very cool!!! I hope others will download and try it on machines they
> wished colorForth worked on.
>
> Thanks!!!
>
> On Thu, 20 Jun 2002, Richard Collins wrote:
>
> > Try http://homepages.paradise.net.nz/rscollins/color1ms3.com. It works
> > on a Pentium with a PCI S3 Trio 32/64 graphics card (1 MB graphics
> > mem.). Note that this works at 800x600, thought you have enough video
> > memory for 1024x768.
> >
> > The other important detail is how much ram you have. The video double
> > buffer in the original color.com is just below 32meg, so if you have
> > less than that you will have problems. If you've got anything on
> > screen with any color.com I'd *guess* that isn't a problem.
> >
> > Good luck,
> >
> > Richard Collins
> >   ----- Original Message -----
> >   From: Miranda Ravetto-Wood
> >   To: ColorForth List Member
> >   Sent: Thursday, June 20, 2002 9:20 AM
> >   Subject: [ColorForth] Boot problems.
> >
> >
> >   I am trying to get colorforth working on an old machine with the
following spec. :-
> >   Pentium 1 120 Mhz, 72 Mb EDO ram, PCI S3 Trio 32/64 graphics card (2
MB graphics mem.) 2 x HDD, 1 x FDD, 1 x CD-R
> >
> >   In all cases I used rawrite to make the boot floppies, with the
following results:-
> >
> >   color.com from www.colorforth.com  black screen/machine hung.
> >
> >   color.com from http://www.oakland.edu/~maslicke/colorforth/vesa-chuck/
1 cm deep 3 color strip at top of screen/immediate reboot.
> >
> >   c4.com from Terry Loveall's site (c4-800x600-p2bd-02.zip) 2cm deep 4
color strip at top of screen/machine hung.
> >
> >   c4a.com from (as above) (c4a-p2bd-02.zip) black screen/machine hung
> >
> >   What I would like to know is, can my setup run colorforth and if so
which version should I be using and how?.
> >   Thanks in anticipation....Duncan
> > ------------------------
> >
> > To Unsubscribe from this list, send mail to Mdaemon@xxxxxxxxxxxxxxxxxx
with:
> > unsubscribe ColorForth
> > as the first and only line within the message body
> > Problems   -   List-Admin@xxxxxxxxxxxxxxxxxx
> > Main ColorForth site   -   http://www.colorforth.com
> >
> >
> >
> > ------------------------
> >
> > To Unsubscribe from this list, send mail to Mdaemon@xxxxxxxxxxxxxxxxxx
with:
> > unsubscribe ColorForth
> > as the first and only line within the message body
> > Problems   -   List-Admin@xxxxxxxxxxxxxxxxxx
> > Main ColorForth site   -   http://www.colorforth.com
> ------------------------
>
> To Unsubscribe from this list, send mail to Mdaemon@xxxxxxxxxxxxxxxxxx
with:
> unsubscribe ColorForth
> as the first and only line within the message body
> Problems   -   List-Admin@xxxxxxxxxxxxxxxxxx
> Main ColorForth site   -   http://www.colorforth.com
>
>
------------------------

To Unsubscribe from this list, send mail to Mdaemon@xxxxxxxxxxxxxxxxxx with:
unsubscribe ColorForth
as the first and only line within the message body
Problems   -   List-Admin@xxxxxxxxxxxxxxxxxx
Main ColorForth site   -   http://www.colorforth.com