Re: [colorforth] How to recreate the 31 July color.com

["Ray St. Marie" <ray.stmarie@xxxxxxxxx>]

As I rush out the door to pick up son at work...

Ray here...

I just wondered if maybe block 30 needs to be recoded for the other
programs to work. Terry had to change that too, as I recall, and I
just pluged in a different block 30 with the proper encoding of the
colorwords, ---- or was it the display settings sizes in SCREEN, and
LOGO and anything else... or both...


Sorry, running back in about 3 hours.

On Fri, Feb 22, 2008 at 3:52 PM, Ray St. Marie <ray.stmarie@xxxxxxxxx> wrote:
> Hi all, Ray's back...
>
> On Fri, Feb 22, 2008 at 3:27 PM, Jason Kemp <jason.kemp@xxxxxxxxxxxxxxxx> wrote:
> > Dear Charley & John,
> >
> > Firstly I should have said that I have a (very old) computer
>
> Please, can you add some specifics? Pentium 2? Speed?
>
> > that runs
> > colorForth
>
> EXCELLENT!
>
> > and the disk and video work perfectly.  Having saved
> > colorForth I also can now boot it directly.  Only the 31 July version
> > works though--none of the modified or later variants boot.
> >
> > What I am trying to achieve is to assemble the 'kernel' source, somehow
> > add in the colorForth source (all that which I think available to edit
> > from block 18 onwards) and then run this.  MASM compiles and links the
> > code to a DOS .COM file, so I then boot the computer with a DOS floppy
> > and try running the program.
> >
> > I've just been trying to find out where I picked up this idea from (I've
> > downloaded so many bits and pieces I've lost track) and I've found it
> > was zip file of Terry Loveall's 800x600 at
> > http://modest-proposals.com/binary/c4-800x600-p2bd-02.zip but this
> > specific version didn't work for me.
> >
> > Jason
>
> Okay Jason if I understand you correctly you are trying to mate a
> colorforth kernel to a colorforth bytecoded section.
>
> If this be the case, you might find that Howerd Oakford's cfdos
> version 4 has a clever facility to accomplish this.
>
> http://www.inventio.co.uk/cfdos.htm
>
> If you are a little more brave you can use a hex editor, and this is
> what I typpically do, tho I started mateing systems using Howerds code
> viewer, the cfdos series of programs at his site.
>
> If this is what you are trying to accomplish, then say and if you need
> help, ask. :)
>
> Ray.
>
>
>
>
> >
> > John Comeau said the following on 22/02/2008 19:16:
> >
> > > Hi Jason, the color.com file is what was saved after loading the
> > > high-level colorForth code, so it has a lot more data in the lookup
> > > tables than does the bare-bones code assembled from the sources. Also,
> > > the sources have a glaring off-by-one error that causes code to load
> > > at the wrong location, hence Charley's advice might work.
> > >
> > > But even running it as a DOS program won't help if you don't have
> > > exactly the right hardware. You might need to use a different
> > > colorForth compiled for your own graphics card.
> > >
> > > On Fri, Feb 22, 2008 at 11:14 AM,  <cshattuck@xxxxxxxxxxxx> wrote:
> > >
> > >> I vaguely remember that what was created with an assembler had to be run from a DOS boot disk.  In other words, it's a DOS program, not a native colorforth.  Am I wrong?  Then when and if it runs you can save it as a native colorforth floppy with SAVE.
> > >>
> > >>  I hope that helps,
> > >>  Charley.
> > >>
> > >>
> > >>
> > >>  ---------------------------------------------------------------------
> > >>  To unsubscribe, e-mail: colorforth-unsubscribe@xxxxxxxxxxxxxxxxxx
> > >>  For additional commands, e-mail: colorforth-help@xxxxxxxxxxxxxxxxxx
> > >>  Main web page - http://www.colorforth.com
> > >>
> > >>
> > >>
> > >
> > >
> > >
> > >
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: colorforth-unsubscribe@xxxxxxxxxxxxxxxxxx
> > For additional commands, e-mail: colorforth-help@xxxxxxxxxxxxxxxxxx
> > Main web page - http://www.colorforth.com
> >
> >
>
>
>
> --
> Raymond St. Marie ii,
>



-- 
Raymond St. Marie ii,

---------------------------------------------------------------------
To unsubscribe, e-mail: colorforth-unsubscribe@xxxxxxxxxxxxxxxxxx
For additional commands, e-mail: colorforth-help@xxxxxxxxxxxxxxxxxx
Main web page - http://www.colorforth.com