Re: [colorforth] How to recreate the 31 July color.com

["Ray St. Marie" <ray.stmarie@xxxxxxxxx>]

Ray, yet again, a thougth...

A componant of the answer will have to do with recodeing Terry's
800x600 screen res on block 30 to the 1024x768 of the original
version. Terry didn't have to change color encoding now that I think
of it. That has to do with cf05.

On Fri, Feb 22, 2008 at 3:59 PM, Ray St. Marie <ray.stmarie@xxxxxxxxx> wrote:
> As I rush out the door to pick up son at work...
>
> Ray here...
>
> I just wondered if maybe block 30 needs to be recoded for the other
> programs to work. Terry had to change that too, as I recall, and I
> just pluged in a different block 30 with the proper encoding of the
> colorwords, ---- or was it the display settings sizes in SCREEN, and
> LOGO and anything else... or both...
>
>
> Sorry, running back in about 3 hours.
>
>
> On Fri, Feb 22, 2008 at 3:52 PM, Ray St. Marie <ray.stmarie@xxxxxxxxx> wrote:
> > Hi all, Ray's back...
> >
> > On Fri, Feb 22, 2008 at 3:27 PM, Jason Kemp <jason.kemp@xxxxxxxxxxxxxxxx> wrote:
> > > Dear Charley & John,
> > >
> > > Firstly I should have said that I have a (very old) computer
> >
> > Please, can you add some specifics? Pentium 2? Speed?
> >
> > > that runs
> > > colorForth
> >
> > EXCELLENT!
> >
> > > and the disk and video work perfectly.  Having saved
> > > colorForth I also can now boot it directly.  Only the 31 July version
> > > works though--none of the modified or later variants boot.
> > >
> > > What I am trying to achieve is to assemble the 'kernel' source, somehow
> > > add in the colorForth source (all that which I think available to edit
> > > from block 18 onwards) and then run this.  MASM compiles and links the
> > > code to a DOS .COM file, so I then boot the computer with a DOS floppy
> > > and try running the program.
> > >
> > > I've just been trying to find out where I picked up this idea from (I've
> > > downloaded so many bits and pieces I've lost track) and I've found it
> > > was zip file of Terry Loveall's 800x600 at
> > > http://modest-proposals.com/binary/c4-800x600-p2bd-02.zip but this
> > > specific version didn't work for me.
> > >
> > > Jason
> >
> > Okay Jason if I understand you correctly you are trying to mate a
> > colorforth kernel to a colorforth bytecoded section.
> >
> > If this be the case, you might find that Howerd Oakford's cfdos
> > version 4 has a clever facility to accomplish this.
> >
> > http://www.inventio.co.uk/cfdos.htm
> >
> > If you are a little more brave you can use a hex editor, and this is
> > what I typpically do, tho I started mateing systems using Howerds code
> > viewer, the cfdos series of programs at his site.
> >
> > If this is what you are trying to accomplish, then say and if you need
> > help, ask. :)
> >
> > Ray.
> >
> >
> >
> >
> > >
> > > John Comeau said the following on 22/02/2008 19:16:
> > >
> > > > Hi Jason, the color.com file is what was saved after loading the
> > > > high-level colorForth code, so it has a lot more data in the lookup
> > > > tables than does the bare-bones code assembled from the sources. Also,
> > > > the sources have a glaring off-by-one error that causes code to load
> > > > at the wrong location, hence Charley's advice might work.
> > > >
> > > > But even running it as a DOS program won't help if you don't have
> > > > exactly the right hardware. You might need to use a different
> > > > colorForth compiled for your own graphics card.
> > > >
> > > > On Fri, Feb 22, 2008 at 11:14 AM,  <cshattuck@xxxxxxxxxxxx> wrote:
> > > >
> > > >> I vaguely remember that what was created with an assembler had to be run from a DOS boot disk.  In other words, it's a DOS program, not a native colorforth.  Am I wrong?  Then when and if it runs you can save it as a native colorforth floppy with SAVE.
> > > >>
> > > >>  I hope that helps,
> > > >>  Charley.
> > > >>
> > > >>
> > > >>
> > > >>  ---------------------------------------------------------------------
> > > >>  To unsubscribe, e-mail: colorforth-unsubscribe@xxxxxxxxxxxxxxxxxx
> > > >>  For additional commands, e-mail: colorforth-help@xxxxxxxxxxxxxxxxxx
> > > >>  Main web page - http://www.colorforth.com
> > > >>
> > > >>
> > > >>
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> > > ---------------------------------------------------------------------
> > > To unsubscribe, e-mail: colorforth-unsubscribe@xxxxxxxxxxxxxxxxxx
> > > For additional commands, e-mail: colorforth-help@xxxxxxxxxxxxxxxxxx
> > > Main web page - http://www.colorforth.com
> > >
> > >
> >
> >
> >
> > --
> > Raymond St. Marie ii,
> >
>
>
>
> --
> Raymond St. Marie ii,
>



-- 
Raymond St. Marie ii,

---------------------------------------------------------------------
To unsubscribe, e-mail: colorforth-unsubscribe@xxxxxxxxxxxxxxxxxx
For additional commands, e-mail: colorforth-help@xxxxxxxxxxxxxxxxxx
Main web page - http://www.colorforth.com