Re: MISC-d Digest V00 #14

["Wayne Morellini" <waynemm@xxxxxxxxxxx>]

From: fox@UltraTechnology.com (Jeff Fox)

>Yesterday I took the F21 in a mouse that I made with an F21d >prototype
>down to do a demo for the Silicon Valley chapter of the Forth >Interest
>Group.  I gave a presentation for about 45 minutes ending with a demo
>of the simulated virtual digital osciloscope on the F21 I put in a >mouse.

Cool, biotechnology
poor mouse.

>last few months.  I haven't been working on testing recently as I
>have a regular job working on something else.

We are glad to hear that.



>I get all 768x482 on the RGB monitor and on an old NEC B/W display I
>have but my big Toshiba TV monitor only shows 640x440.  Version 2

Did adjusting the horizontal and vertical sizing help at all?

>I would rather use 2x 1Mx16 DRAM on the next board I do for F21d.
>We may do an F21e before too long if things work out. The plan is
>for .35 and an SDRAM interface.  This should about double the
>sustained performance level on stack code to about 400 mips.  Perhaps
>more, it depends on what speed we get in .35 and which speed SDRAM
>is used.

Yes Finally.

Chuck emntioned that it should only take a couple of weeks to strecth 21 
bits to 32 bits does that still stand, it would be good to see in the 
future?

Well Jeff good to have you back.

Wayne



______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com